Mystery Unveiled: The Large Inventory of Non-Oriented Silicon Steel for Wind Turbine Generator Cores

Non oriented silicon steel (CRNGO) sits in every rotating electrical machine. Wind turbine generators are no exception. Consequently, as wind capacity grows worldwide, demand for CRNGO coil rises. At Jiangsu Zhongtong Weiye Special Steel Co., Ltd., we keep common grades in stock. Here is why wind turbines need this specific material.

Why Wind Generators Use CRNGO, Not CRGO

Wind generator flux rotates in a full circle. Furthermore, the rotor spins at variable speed. Consequently, the magnetic field runs in every direction through the stator. CRGO’s directional advantage becomes useless. Instead, CRNGO’s random grain orientation gives uniform performance in all directions.

Wind Turbine Generator Types

Turbine type Speed Generator type Steel grade
Gearbox-driven 1,500–1,800 rpm Induction M43 / 50W470
Direct-drive 10–20 rpm Permanent magnet 0.35 mm high-grade
Semi-direct 100–500 rpm Permanent magnet 0.35 mm premium

Consequently, direct-drive turbines need higher-grade, thinner CRNGO than gearbox machines.

Grade Selection by Efficiency Target

Wind turbine makers target IE3 or IE4 efficiency. Consequently, they specify:

  • Standard efficiency: M43 / 50W470.
  • Premium efficiency: M36 / 50W350.
  • High efficiency: M19 / 35W250.

Furthermore, direct-drive generators often use 0.35 mm or even 0.1 mm ultra-thin strip to cut high-frequency loss.

non oriented silicon steel

Why We Keep Stock

Wind projects schedule tight. Furthermore, generator orders arrive in batches. Consequently, we keep common CRNGO grades (M43, M36) in coil. Furthermore, we slit to stator lamination width. Consequently, your stamping shop gets material within weeks, not months.

What We Supply

We ship non-oriented electrical steel coil:

  • Grades: M19, M27, M36, M43.
  • Thickness: 0.35 mm, 0.50 mm.
  • Slit to stator lamination width with ±0.05 mm tolerance.
  • Coil ID 508 mm or 406 mm.

Furthermore, we supply the material that stamping shops form into stator and rotor laminations. We do not stamp finished cores.

What We Do Not Do

We do not:

  • Manufacture wind turbines or generators.
  • Stamp stator or rotor laminations.
  • Supply permanent magnets.

Consequently, we are your upstream coil supplier for the wind energy supply chain.

Specify Your Wind Generator Steel

Tell us:

  1. Turbine rating (kW or MW).
  2. Generator type (direct-drive or gearbox).
  3. Required efficiency class (IE3 or IE4).
  4. Lamination width and coil ID.

We will recommend the correct grade and quote.

  • Email: vera.liang@ztwysteel.com
  • Location: Xishan District, Wuxi, Jiangsu, China
  • Supply range: CRNGO non-oriented steel M19–M43, slit strip
  • Slitting tolerance: ±0.05 mm
  • Documentation: MTC with core loss, thickness, width, and insulation coating

We reply within one working day.